收藏本页 您好,欢ying来到上haifengyi娱乐,fengyi娱乐app将竭诚为您服务!    gong作时间:上午 9:00 - 下午 18:00 wen馨提示:
EHS wang站
热men搜索:
防火gui、安全gui、化学品gui、gongye安全锁具、盛漏托盘、xifu棉套装等gongye安全与环保产品;实yan台、实yanshi家具、通风gui、实yangui等实yanshi设计规划、生产、安装及配jian;离xin机、防爆gong具、烘箱、超声波清洗机、水质监测仪器及实yanshi耗材等共3大类产品。
产品分类
苀ang谱ㄇ鼽/span> >>更多
Ultra-EverDry?应用指南|上haifengyi娱乐实yanshi设备有限公司
Ultra-EverDry?应用指南
 
.Ultra-Ever Dry? SE 7.6.110 is a solvent based two part (top and bottom) coating system. It is suitable for indoor or outdoor use. The system offers superhydrophobic and superoleophobic performanceand has been shown to maintain a high level of performance
under a variety of conditions and for extended time. The system is useful for non-wetting, anti-icing, self-cleaning, anti-bacterial, and for corrosion protection.
Ultra-Ever Dry? SE 7.6.110是一zhong溶剂型涂层(biaomian和da底两个部分)。适用yushi内或shi外应用。已经证ming其可yizai多zhong条jian下和较长时间内weichi超强deshu水和shu油xing能。该涂层对yu防潮、防结冰、自洁,**、防腐蚀等都非chang有用。
 
.Ultra-Ever Dry? SE 7.6.110 yields a matte finish surface that withstands moderate abrasion. The coating is translucent white in appearance depending on thickness used. Ultra-Ever Dry? SE 7.6.110 is applied in two steps using an equal application volume of bottom coat and top coat.
Ultra-Ever Dry? SE 7.6.110 ?SE产生一个ya光biaomian可yi承受适度demo擦。涂层材料chengban透ming皕i?/span>皕i玠e浓度ze取决yu喷涂hou度。Ultra-Ever Dry? SE 7.6.110 ?SE喷涂作ye分两个步骤用相同量deda底层和biaomian依次喷涂。
 
san.CAUTION: Items coated with Ultra-Ever Dry? will have a translucentwhite appearance which could affect the color of the product being coated. TEST ON AN INCONSPICUOUS AREA PRIOR TO FULLY COATING.
注意Ultra-Ever Dry?涂层chengban透ming皕i?/span>可能会ying响到产品本身de色cai。suoyi建议您zai使用前zai一些不显眼de部位先做一蟣v祔an,襶un范ú换岫阅鷇e产品造chengying响hou再使用。
 
si.Personal Protection Equipment:
个人防护设备:
Always wear the following equipment when applying:
zai施gong作ye过程中请使用yi下个人防护设备:
Respirator - NIOSH approved half-face respirator P100 rating with organic vapor cartridge
呼xi器:NIOSH核准debanmian罩式带有机蒸qi滤盒de呼xi器P100
Safety glasses/goggles
安全眼睛/护mu镜
Nitrile gloves
丁腈手套
 
.Application Equipment Options:
施gong设备xuan项:
Option A: Pneumatic Sprayer
?xuan项A:气dong喷wu器
Air compressor
空压机
Conventional gravity fed, pneumatic sprayer, requires two separate sprayers
chang规de自donggei料气dong喷wu器,需要两把dan独de喷wu器
Note: Remove the pre-installed filters in the sprayer head
注意: 拔chu喷wu器头上yu装de过滤嘴
Air pressure = 20-35 psi (138-241 kPa) nozzle
气压=20-35psi(138-241kpa)喷嘴
Tip size = 0.020-0.050 inches (0.50-1.27 mm)
顶duanchi寸=0.020-0.050ying寸(0.5-1.27mm
 
Option B: Pump Sprayer
?xuan项B:气压式喷wu器
Two hand pump sprayers, one for top coat and one for bottom coat.
两个手dong气压喷wu器,一个用yuda底涂层、一个用yubiaomian涂层
Pumps must be compatible with solvent in coating.
气压喷wu器必xu适heyu溶剂类涂料
Xylene for bottom coat and Acetone for top coat.
da底涂层han有二甲苯,biaomian涂层han有丙酮。
Adjustable tip size to provide fine mist.
可调节de喷嘴可yi提供*适hedehou度
 
Option C: Trigger Sprayer
?xuan项C:ban机式喷wu器
Two trigger sprayers, one for top coat and one for bottom coat. Usually available in quart (950 mL) sizes.
两个ban机式喷wu器,分别用yuda底和biaomian涂层。通chang可提供1夸脱(950 hao升)rongji大小。
Pumps must be compatible with solvent in coating.
ban机式喷wu器必xu适用yu溶剂类涂料。
Adjustable tip size to provide fine mist.
可调节de喷嘴可yi提供*适hedehou度
 
.Optional Equipments
?fujian设备
Heat gun or blow dryer to speed up drying process.
热风枪或者吹风机用yu加速干燥过程
Xylene for cleaning     
二甲苯清洗
Spreading Rate (coverage):
涂布lv:
150-180 sq ft/gal (3.68-4.42 m2/L)
150-180平方yingchi/加仑3.68-4.42平方mi/
 
liu.Application:
应用
Surface Preparation: Remove all oil, grease, dust, dirt, loose rust, and other foreign materials to ensure adequate adhesion of bottom coat. Sanding of the surface with 150 grit silicon carbide sand paper can enhance surface adhesion.
biaomianchuli:去chusuo有de油、油脂、灰chen、污垢、shusong锈层及其他异物,襶un繁a底涂层良好defu着li。如guo您使用150#砂纸damobiaomiande话可yi提高biaomianfu着li。
Step 1: Bottom Coat
步骤1:da底涂层
Shake the can of bottom coat well and pour into dedicated sprayer.Once sprayer is filled to the desired amount, shake well and apply multiple thin and uniform coatings to obtain a wet thickness of 3.0-5.0 mils (76-127 microns). This will form a dry film thickness of 1.0-1.5 mils (25-38 microns). Some agitation during application is recommended. Avoid over wetting or pooling. Allow 15 to 20 minutes of drying time before applying top coat. A heat gun or blow dryer may be used on low setting to speed up drying time.
摇yunda底涂层,倒ru专觤en鐆u器。注满喷wu器yihou摇yun,多次薄而均yunde喷涂到3.0-5.0 mils (76-127 microns)。当干燥houhou度会zai1.0-1.5 mils (25-38 microns)。建议zai作ye过程中不ting晃dong喷wu器。避免过yu潮shide环境和水chi。da底涂层喷涂hou需要等待15-20穤hong樱涓稍飄ou再xingbiaomian涂层喷涂。热风枪或者吹风机可yi加速干燥de过程,缩duan固化时间。
Step 2: Top Coat
步骤2:biaomian涂层
A separate sprayer used only for top coat is required. Shake the can of top coat well and pour into sprayer. Once sprayer is filled to the desired amount, shake well and apply multiple thin coats. Do not overcoat. Use an equal volume of top coat to cover the bottom coat. Some agitation during application is recommended.
biaomian涂层必xu使用一个dan独喷wu器。摇yunbiaomian涂层,倒ru喷wu器。注满喷wu器yihou摇yun,多次薄而均yunde喷涂。不要过多de喷涂,使用相同de量覆gaida底涂层。建议zai作ye过程中不断de晃dong喷wu器。
Avoid over wetting or pooling. The top coat will produce a translucent white appearance.
避免过yu潮shide环境和水chi。biaomian涂层将cheng现皕i玝an透mingde外观。
Step 3: Drying/Curing of System
步骤3:干燥/固化方法
The coating will become superhydrophobic within 30 minutes of the top coat application. For best results, allow 2 hours of drying time. A heat gun or blow dryer may be used on low settingto speed up drying time.
涂层de超shu水xing能会zai喷涂biaomian涂层yihou30穤hong幽赾heng现。*佳效guo大gai需要2个小时de干燥时间。如guo使用热风枪或者吹风机将加速干燥过程,缩duan固化时间。
Step 4: Cleanup:
步骤4:清li:
Clean tools/equipment immediately after use with xylene. Empty left over top or bottom coat into original containers.作yehou立即使用二甲苯清ligong具/设备。sheng余debiaomian或da底涂层倒hui原rong器内。
 
.Care and Repair:
wei护与保yang:
Ultra-Ever Dry? is a durable coating that exhibit superhydrophobicityand superoloephobicity. After curing the coatings will repel water mixtures and refined oil. Cleaning of the surface should be performed using low pressure water spray. The surface
should demonstrate self cleaning properties under these conditions. Dust and dirt should rinse off easily. The surface will remain completely dry. The surface will lose it properties if treated with detergents, soap, some solvents or high pressure water.
 Due to the natural oils in the skin, excessive handling with bare hands of treated materials can cause a reduction in performance as can severe abrasion.
Ultra-Ever Dry?必xu同时使用两zhong涂层方可cheng现超shu水与超shu油特xing。当涂层完全固化hou可yi抵抗水混he物和精炼油。请使用di压水喷wu来清洗biaomian,zaidi压水流de冲洗下biaomian将会实现自洁。灰chenyi及污筬u莄hangrong易被冲洗掉,biaomian将保chi完全干燥。洗涤剂、肥皂、某些特别溶剂或是高压水流将会ying响涂层biaomian部分xing能。皮fu中han有天然油脂,故过多de徒手接触喷涂过debiaomian亦可能会yin严重mo损而致biaomianxing能下降。
 
 
 
Instructional Video available at www.UltraEverDry.com-or-Scan this QR Code with your smart phone.
 
 
也可zi询:021-69106488

上haifengyi娱乐j将为你服务!

产品链接:http://www.caisonglabs.com/s04/caisonglabs/sjml/20130308/3049448/1.html
 
Copyright? 2003-2020  上haifengyi娱乐实yanshi设备有限公司版quansuo有
dian话:021-69106488 021-69106624 传真:021-69106489 地址:上hai市song江区广富linlu658弄3号xie字楼1410shi you编:201620

沪ICP备13012389号    

沪公wang安备 31011402005026号